Review transformer GA drawings for cable entry, terminal geometry, busduct flanges, support loads, access and installation dimensions before design freeze.

Check 50Hz and60Hz transformer compatibility using voltage-to-frequency ratio, rated current, taps, losses, impedance, auxiliaries and downstream equipment requirements.

Specify dry-type transformer E, C and F performance from site exposure, temperature duty and fire requirements, then check the standard edition and report scope.

Understand dry-type transformer Pt100 sensing, fan hysteresis, alarm, trip and sensor-fault logic, plus the interface checks needed for a project specification.

Calculate a preliminary heat load and airflow, then check net free openings, fan duty, recirculation and maintenance conditions for a dry-type transformer room.

Choose dry-type winding construction around the site’s moisture, contamination, cooling and maintenance conditions. Compare cast resin and VPI with an application matrix and project checklist.